ການກວດກາຄວາມປອດໄພຂອງ
ຂໍ
1. The ຂໍ used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.
2. The ຂໍ used for the power-driven lifting mechanism shall be tested with 2 times the rated load as the inspection load.
3. ຫຼັງຈາກ
ຂໍຖືກເອົາອອກຈາກການກວດກາ, ບໍ່ຄວນມີຂໍ້ບົກພ່ອງຫຼືການປ່ຽນແປງທີ່ຊັດເຈນ, ແລະການເພີ່ມຂຶ້ນຂອງລະດັບເປີດບໍ່ຄວນເກີນ 0.25% ຂອງຂະ ໜາດ ເດີມ.
4. ສໍາລັບຂໍs that have passed the inspection, a mark should be printed in the low-stress area of the ຂໍ, including the rated lifting weight, factory mark or factory name, inspection mark, production number, etc.
ມາດຕະຖານການຂູດສໍາລັບ
ຂໍsໄດ້
ຂໍຄວນຈະຖືກຍົກເລີກເມື່ອ ໜຶ່ງ ໃນສະຖານະການຕໍ່ໄປນີ້ເກີດຂຶ້ນ:
â ‘ຮອຍແຕກ;
ການສວມໃສ່ພາກສ່ວນອັນຕະລາຍເຖິງ 10% ຂອງຂະ ໜາດ ເດີມ;
â“ degree ລະດັບເປີດແມ່ນເພີ່ມຂຶ້ນ 15% ເມື່ອທຽບກັບຂະ ໜາດ ເດີມ;
④The torsion deformation of the ຂໍ body exceeds 10°;
⑤The dangerous section of the ຂໍ or the neck of the ຂໍ is plastically deformed;
⑥The ຂໍ thread is corroded;
⑦When the wear of the ຂໍ bushing reaches 50% of the original size, the bushing should be replaced;
“ ເມື່ອແມນຄັນທ່ອນຂອງຊິ້ນສ່ວນ
ຂໍຖືກໃສ່ກັບ 5% ຂອງຂະ ໜາດ ເດີມ, ໜ້າ ທ້ອງຄວນໄດ້ຮັບການປ່ຽນແທນ.